| MID WiFi | MID | Kelikamerat | Bike Meter |
support@veerasolutions.com MID WiFi User's Guide |
Use your iPhone/iPad/Watch as an advanced marine instrument display and navigation aid for sailing instead of buying an expensive traditional equipment. Marine Instrument Display WiFi allows you to create/follow/transfer routes, track your path, control autopilot and receive/store/forward NMEA0183 data over WiFi from onboard systems and see AIS targets on the map. Send and receive data through iCloud over the Internet. It features a unique wind view, race starter, various alarms, calculates angle of heel and predicted boat speed based on the VPP (Velocity Prediction Program) tables that can be easily copy&pasted to the application.  (Full version) (Evaluation version) APPLE WATCH MID WiFi features the world's first autopilot remote controller running on Apple Watch 
FEATURES - Compass heading (mag/true) (HDG) * Course over ground (COG) * Speed over ground (SOG) * Average SOG (ASOG) * Maximum SOG (MSOG) * Trip Distance (TRIP) * Trip Time (TIME) * Countdown Timer (CDT) * Distance to Line (DTL) * Time to Line (TTL) * Heeling (HLG) * Barometric Pressure (BPR) (NMEA or iPhone 6->) * Bearing to Waypoint (BTW) * Distance to Waypoint (DTW) * Time to Waypoint (TTG) * Cross Track Error (XTE) * Velocity Made Good to Waypoint (VMGwpt) * Position (POS) ** Apparent wind angle and speed (AWA, AWS) ** True wind angle and speed (TWA, TWS) ** Maximum True and Apparent Wind Speed (MAWS, MTWS) ** True wind direction (TWD) ** Velocity Made Good to Wind (VMGwnd) ** Boat speed (SPD) ** Maximum Boat Speed (MSPD) ** Depth (DPT) ** Air and Sea Temperatures (AIR, SEA) ** Predicted Boat Speed (PSPD) ** Boat Speed to Predicted Boat Speed Ratio (SPR) ** Revolutions Per Minute (Engine/Shaft) (RPM) ** Propeller Pitch (PRP) ** NoLand Eng. Analog Values (EAV1-5) ** TackTick MicroNet Free Format PTAK sentences (FFP1-4) ** Rate Of Turn (ROT) * = Internal GPS or NMEA-WiFi bridge required ** = NMEA-WiFi bridge required (e.g. Vesper Marine XB-8000 and WatchMate Vision, sSailTimer Wind Vane/Instrument, Simrad/Lowrance/B&G GoFree WIFI-1, RS232-WiFi, Digital Yacht iAIS/WLN10, ShipModul MiniPlex-2Wi/3Wi/3E, iMux, Ockam LANbridge) WIND VIEW - Shows Apparent and True Wind Angles simultaneously - Size of the blue sector indicates the variation in wind direction MAP VIEW - AIS targets (speed, TCPA, CPA) (** - Create and follow routes - Transfer routes on NMEA - Create and replay tracks - Autopilot control (Raymarine, requires MiniPlex-3Wi/3E NMEA0183/SeaTalk/WiFi multiplexer) - Share the tracks by email (GPX, NMEA) - Access stored NMEA data via iTunes File Sharing ALARMS - Depth (Deep, Shallow) - Anchor (Deep, Shallow, Distance) - Wind (AWA/TWA/AWS/TWS High/Low, TWD Shift) - Three color modes for day and night (black/white, white/black, red/black) - Supported units: kt / nm, mph / mi, km/h / km, m / ft, °C / °F HOW TO USE - Tap the SET to enter the Settings page - Tap the value of any field to cycle through the color modes - Tap the title of any field (such as TIME) to select the data to the field - Tap a unit to cycle through the unit modes - Tap the unit (°) of the heeling (HLG) to calibrate (zero angle) - Press the value of any field at least two seconds to reset the TIME, ASOG, MSOG and TRIP - Swipe to switch between data pages - Rename a track or a route by tapping the name of it - Tap the LOCK to lock/unlock the screen (orientation and other functionality except scrolling and TIME/ASOG/MSOG/TRIP reset) - NMEA0183 data can be forwarded as UDP multicast to other devices/apps - Location services are switched on by default. They can be switched on/off by tapping the coordinates. If the application is put in background it runs 30 minutes before being suspended. - The trip time runs while moving (SOG > 0) - The COG is shown while moving (SOG > 0) (internal GPS) SERVER CONFIGURATION - See User's Guide of MID WiFi or your NMEA-WiFi bridge for the IP address and the port - Use IP address 255.255.255.255 for receiving UDP broadcast/multicast - Use 127.0.0.1 and 55554 for SailTimer Wind Instrument - Ports . - 2050 for Simrad GoFree discovery (NSS 2.0) . - 2052 for Simrad GoFree discovery (NSS 2.5) . - 5000-5010 for Ockam LANbridge . - 55554 for SailTimer Wind Vane More configuration instructions at the end of the page. STARTING LINE - Mark the position of the Committee Boat by touching the (+) button - Move to the position of the Pin and mark the position by touching the (+) button - The distance to the above positions are shown next to the (+) buttons COUNTDOWN TIMER - Configure the start time (1 - 30 minutes) by touching the SET to enter the Settings view - Start/sync the timer by touching the "sync" - Stop the timer by touching the "sync" at least two seconds - The timer beeps every minute and when 50, 40, 30, 20, 10, 5, 4, 3, 2, 1, 0 second(s) are remaining CALIBRATION 1. The back cover must be faced forward accurately in order to get the correct compass heading. 2. Mount the iPhone/iPad securely and make sure it cannot move accidentally to ANY direction. 3. Tap the unit field (°) of the heeling (HLG). HLG is set to zero and the heading shows the correct value. VIDEOCLIPS SCREENSHOTS - iPhone  
      Simrad GoFree WiFi The image below illustrates how to find the IP address of the GoFree WiFi device. You may also use the discovery by setting the IP address 255.255.255.255 and the port 2050 (NSS 2.0) or 2052 (NSS 2.5). The application selects the first available MFD.  |
|||
 |
||||